Description	Torque setting
Air intake adaptor to Carbs.	17 lb/ft
Alternator mounting bracket to cylinder head	3/8 U.N.C bolt :: 25 lb/ft 5/16 U.N.C bolt 17 lb/ft
Alternator to mounting bracket	17 lb/ft
Alternator to adjusting link	17 lb/ft
Chain wheel to camshaft	45 lb/ft + lock tight
Connecting rod bolt	35 lb/ft + lock tight
Clutch attachment to flywheel	20 lb/ft
Cylinder head bolts No. 1 - 10	70 lb/ft
Cylinder head bolts No. 11 - 14	20 lb/ft + lock tight
Distributor clamp bolt	14 lb/ft
Exhaust manifold to cylinder head	16 lb/ft
Fan attachment	9 lb/ft
Flexible drive plate to starter ring	25 lb/ft
Flexible drive plate to crankshaft	60 lb/ft + lock tight
Flywheel to crankshaft	60 lb/ft + lock tight

Description	Torque setting
Mains Bearings 1 - 8	13.5 NM first time round then 72NM
Mains Bearings 9 -10	13.5 NM first time round then 92 NM
Big Ends	20 NM and then 90o more.
Side Bolts	13.5 NM first time round the 45 NM
Head Bolts (10 bolt head)	25 NM then 90o then 90o again.